Publicidad
Idiomas disponibles
Idiomas disponibles
Operation
□ Before turning on the dehumidifier, be sure that the bucket is empty and fits all
the way into the dehumidifier.
□ Each time you unplug the dehumidifier or power is interrupted, the controls will
return to the previous settings when power is restored.
□ Humidity displayed is between 30% and 90% relative humidity.
□ Humidity can be set between 30% and 80% relative humidity.
□ It's important to set the desired humidity level to an achievable setting. To ensure
energy-efficient operation, only use the dehumidifier in a closed space, with no
open windows or other sources of moist air (to avoid continuous running).
□ Operating temperature is between 38°F to 90°F (3.2°C to 32.2°C). At temperatures of 38°F (3.2°C) or less, water freezes inside the
product. At temperatures over 90°F (32.2°C), the internal temperature of the product trips a protective device which deactivates the
product to avoid product damage.
□ The compressor has a 3-minute delay before restarting. If the product is stopped and immediately restarted, to protect the compressor
there is a 3-minute delay until the compressor restarts.
□ When the dehumidifier is operating, the indoor temperature will rise. The dehumidifier does not have a cooling/heating function. Heat is
generated during operation, so the room temperature may be increased by about 6°F (3°C) depending on the usage conditions (indoor
temperature, size of the room).
1
Using the Control Panel
Control Type 1
Control Type 2
Control Type 3
N
/VENT.
9
NOTE: In the event of a power failure, your
dehumidifier will operate at the previous
settings when the power is restored.
NOTE: The symbols may be
different from these models,
but the functions are similar.
NOTE: Set point is relative
humidity: lower is more dry,
higher is less dry.
Publicidad
