Beckman Coulter HHPC 6+ Manual Del Usuario página 21

The HPC Data Web Server page opens.
NOTE
c. Press the "rebuild button" on the browser page to build the file.
6
Open the DATA.tsv file or if enabled the secure DATA .XLS file.
Move data to a mass storage device
1
Connect the mini-USB cable to the mini-USB port on the instrument and the USB port on the
PC.
2
In Windows Explorer on the PC, navigate to the HPC USB drive and open the DATA.TSV file.
3
Disconnect the USB cable or do a power cycle of the instrument. New data is added to the DATA
file.
Maintenance
WARNING
Multiple hazards. Do not disassemble the instrument for maintenance. If the
internal components must be cleaned or repaired, contact the manufacturer.
CAUTION
Multiple hazards. Only qualified personnel must conduct the tasks described in
this section of the document.
Charge the battery
The instrument operates on DC power that is supplied by an internal rechargeable battery or AC
wall adapter. The battery is not user replaceable. If a new battery is necessary, contact the
manufacturer.
DOC026.97.80271, Edition 9
For this option, the PC and the HHPC+ instrument must be connected to the same local area
network. The PC and the HHPC+ instrument must not be separated by a router, and the network
must be configured to allow packet broadcasting. In case of difficulty, contact your network
administrator.
HHPC 6+, HHPC 3+, HHPC 2+ USER MANUAL
Maintenance
21 / 26