Publicidad
Idiomas disponibles
Idiomas disponibles
2.2. Product usage
INSTALLATION
• Before using the freezer, remove
all packaging materials including
bottom cushions and foam pads
and tape inside the freezer, and tear
off the protective film on the door
and the freezer body.
• Keep away from heat and avoid exposure to direct sunlight. Do not
place the freezer in moist or wet environments to prevent rust or
reduced insulating efficacy.
• The freezer should be placed in a well-
ventilated indoor setting; the ground must
be flat, and sturdy.
• Top clearance above the freezer must be
greater than 70 cm, and the clearance on
both sides and backside must be more than
20 cm to facilitate heat dissipation.
IMPORTANT:
Precautions before installation: Before installing or adjusting
accessories, ensure the freezer is disconnected from the power
supply. Precaution must be taken to prevent the handle from falling
and causing any personal injury.
ENERGY SAVING TIPS
• The appliance should be installed in the coolest area of the room,
16
Publicidad
