Publicidad
Idiomas disponibles
Idiomas disponibles
starts to blink rapidly. When the blue LED is blinking rapidly, the Bluetooth® retro phone is in
pairing mode.
Step 4:
Follow your cell phone's instruction manual. This normally involves going to "Setup",
"Connect", "Connection" or "Bluetooth®" menu on your cell phone and then selecting the
option to "Look for Device" or "Discover" to initiate the Bluetooth® pairing process.
Step 5:
Your cell phone will scan for local Bluetooth® devices and should locate the Bluetooth®
retro phone in about 10-20 seconds.
Step 6:
When you pair your cell phone with the Bluetooth® retro phone, it will prompt you to enter a
PIN– enter "0000".
Step 7:
At this point, you should be able to place a call using your cell phone keypad, phone book,
or voice dial and use the Bluetooth® retro phone instead of your normal cell phone handset.
The Bluetooth® retro phone should function much like any hands-free headset.
-
To answer an incoming call, press the silver button.
-
To end the current call, press the silver button.
-
To turn off the Bluetooth® retro phone, press and hold the silver button for about
3 seconds until you hear a short sound and the blue LED turns off.
Safety precautions:
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of the product or damage
caused due to incorrect use of this product.
General:
- Designs and specifications are subject to change without notice.
- All logos brands and product names are trademarks or registered trademarks of their respective
holders and are hereby recognized as such.
- This manual was produced with care. However, no rights can be derived. König Electronic can not
accept liability for any errors in this manual or their consequences.
- Keep this manual and packaging for future reference.
Attention:
This product is marked with this symbol. It means that used electrical and electronic products
should not be mixed with general household waste. There is a separate collections system for
these products.
To reduce risk of electric shock, this product should ONLY be
opened by an authorized technician when service is
required. Disconnect the product from mains and other
equipment if a problem should occur. Do not expose the
product to water or moisture.
3
Publicidad
