SANZ Clima Dreiha CBX 90N Manual página 9

Method 2: Optional installation frame (standard frame or flush-mount frame) for a secure fit and a smart finish
(as shown below)
1.Unscrew the screws on the
refrigerator and place the frame
behind the door to fix it.
1. Unscrew the screws on the
refrigerator and fix the frame
flush with the door.
STEP 6: Verify the installation. Once the installation had been finished, check the continuity of the earth circuit
and carry out all electrical safety testing provided for by current regulations. Protect and fix the cables in order
to prevent accidental pulling of the cable from disconnecting it from the connections or coming into contact
with hot parts with a temperature above 50° C or with sharp parts.
Inner Length: 471mm
2.Fix the frame to the refrigerator
with screws and then push the
refrigerator into the cabinet.
Example-2 Optional standard frame
Inner Length: 471mm
2.Fix the frame to the refrigerator
with screws and the push the
refrigerator into the cabinet.
Example 3- Optional flush mount frame
8
3.Fix the refrigerator to the
cabinet through the frame.
3. Fix the refrigerator to the
cabinet through the frame.
90N