EKSA Telecom H5 Manual Del Usuario página 10

Bluetooth Pairing
2. When enabled, the indicator on the EKSA PC adapter will flash a
blue light, which indicates that it is in pairing mode. Then, put the
headset on pairing mode and place it as close to the EKSA PC
adapter as possible (within 8 inches). The headset will automati-
cally connect to the EKSA PC adapter.
Note: It takes about 20 seconds to establish a connection between the headset and a PC for
the first time. Suppose the connection is unsuccessful, please unplug the adapter and
plug it back into the PC. Then restart the headset's pairing mode and reconnect to your
computer.
3. After the headset is successfully connected, the Bluetooth
indicator on the headset will slowly flash a blue light while the
EKSA PC adapter's indicator will always be blue.
Note: When the EKSA PC adapter is not in use, please insert the adapter into the storage
hole of the charging stand to avoid misplacing it.
U S B - A i n t e r f a c e
Indicator flashes in blue light
Ty p e - C i n t e r f a c e
8
Indicator flashes in blue light