Leica CINE 1 Instrucciones Abreviadas página 31

INSTALLING THE WALL BRACKETS
Check the wall type
Studded drywall
Minimum stud size:
standard 51 x 102 mm (2 x 4 inches)
nominal 38 x 89 mm (1½ x 3½ inches)
Prepare the room
Check the size of your room:
• Width: 3 m (~118.11 inches)
• Height: 2 m (~78.74 inches) from the installation area to the ceiling.
• For an optimal visual experience, we recommend a minimum clearance of 4.5 m (177 inches) from the screen.
Recommended stand size:
We recommend positioning the Leica Laser TV on a stand measuring approximately 50 cm (20 inches) high by 42 cm (16 inches) wide.
L1=0.385 m
(15.16")
Install the wall bracket
Note: ensure that you have the paper template (
Measure 1.85 m (73 inches) up from the top edge of the stand for the Leica Laser TV and mark the height with the pencil.
Place the top edge of the paper template in the center of the wall on the mark.
Ensure that the paper template is totally straight.
H=0.411 m
(16.18")
), a pencil, adhesive tape, a spirit level, and a screwdriver to hand.
Z2
Solid concrete or hollow blocks
Minimum solid concrete thickness: 203 mm (8 inches)
Minimum hollow block size:
standard 203 x 203 x 406 mm (8 x 8 x 16 inches)
Place the screen on the wall brackets.
W≥3 m (118.11")
Paper template ( Z2
H3=1.808 m
(71.18")
)
H2=1.878 m H1≥2 m (≥78.74")
(73.94")
Stand height
Spirit level
Paper template (
Z2
)