Bresser MeteoTemp TBV Manual De Instrucciones página 21

7. Setting up power supply Base device
1. Remove the battery compartment cover.
2. Insert the batteries into the battery compart-
ment. Ensure that the battery polarity (+/-) is
correct.
3. Replace the battery compartment cover.
Remote sensor:
1. Remove the battery compartment cover.
2. Insert the batteries into the battery compart-
ment. Ensure that the battery polarity (+/-) is
correct.
3. Set the channel selector switch to the desired
channel.
NOTICE! This device can be operated with three
remote sensors. Each remote sensor being con-
nected must be operated on a different channel.
4. Replace the battery compartment cover.
Manual_7004340-7004380_MeteoTemp-TBH_de-en-fr-nl-es-it_BRESSER_v032024a.indb 21 Manual_7004340-7004380_MeteoTemp-TBH_de-en-fr-nl-es-it_BRESSER_v032024a.indb 21
8. Time Setting
Manual time setting
1. Press and hold button for approx. 3 se-
conds to enter to the time setting mode.
2. Digits to be set are flashing.
3. Press or button to change the value.
4. Press button to confirm and continue to the
next setting.
5. Settings order: Week languages > RCC On/Off
> Time zone > Year > DM/MD format > Month >
Day > 12/24H format > Hour > Minute > Barome-
ter unit > Barometer value.
6. Finally press the button to save the settings
and exit the setting mode.
In normal mode, press and hold the
enter the RCC receiving mode.
EN
button to
21
14.03.2024 08:21:44 14.03.2024 08:21:44