Bresser MeteoTemp TBV Manual De Instrucciones página 23

11. Channel select
3. In normal mode, press the
select Channel 1, Channel 2 , Channel 3 or
cycle display.
4. Hold the button for approx. 3 seconds to
reset values and search for an RF signal.
NOTICE! Always make sure the channel chosen
on the display unit matches the channel option
chosen on the outdoor sensor.
12. Backlight ( Always power by
adapter)
When power on the adapter, press the
button to choose the backlight level. It
has 4 levels backlight.
In normal mode:
1. Press and hold button for approx. 3 seconds
to enter the night mode.
2. Digits to be set are flashing.
Manual_7004340-7004380_MeteoTemp-TBH_de-en-fr-nl-es-it_BRESSER_v032024a.indb 23 Manual_7004340-7004380_MeteoTemp-TBH_de-en-fr-nl-es-it_BRESSER_v032024a.indb 23
3. Press
4. Press
button to
to the next setting.
5. Settings order: night mode on/off > Hour
for night mode start time > Minute for night
mode start time > Hour for night mode end
time > Minute for night mode end time
6. Finally press the MODE button to save the
settings and exit the setting mode.
The backlight level for night mode will be Level
2, When turn on the night mode, the AUTO DIM
symbol will display.
13. Temperature Alert
Temperature alert setting
1. In normal mode, Press the
check the indoor and outdoor temperature
alert.
or button to change the value.
button to confirm and continue
button to
14.03.2024 08:21:45 14.03.2024 08:21:45
EN
23