MPM MOD-71 Manual De Instrucciones página 36

EN
CLEANING AND MAINTENANCE
CAUTION! Keep the dust container level under regular control. An overfilled container reduces
vacuuming efficiency, increases energy consumption and causes the filters to become dirty more
quickly.
CAUTION! Do not submerge the vacuum cleaner, battery charger and battery in water!
CAUTION! To achieve the best possible performance of the vacuum cleaner, clean the filters and
the dust container after each use.
CAUTION! Maintenance work must be carried out with the vacuum cleaner switched off and the
charging cable disconnected!
1. Clean the outer surfaces of the vacuum cleaner with
a damp cloth and then wipe it dry. Use a mild cleaning
agent for stubborn dirt.
2. In order to empty the dust container, switch off the vac-
uum cleaner with a switch. Place the dust container over
the dustbin, push down the bottom opening button and
dump the contents of the container into the dustbin.
Close the bottom (fig.7).
3. To clean the filters, hold the dust container with one
hand and the handle with the other, then pull upwards on
the lever with your index finger (fig.8).
4. Remove the filters (steel-mesh filter, sponge filter, EPA
filter) from the dust container Clean all the filters of dust.
Clean the filter sponge filter and EPA filter under running
water and dry them thoroughly before assembling them
in the vacuum cleaner. You must not submerge the steel-mesh filter and dust container in water as
this may result in damaging the vacuum cleaner. Dry the container and the steel-mesh filter with
a dry cloth (fig. 8).
CAUTION! Do not assembly wet filters – risk of damage to the vacuum cleaner!
Fig. 8
36
Fig. 7