Publicidad
Idiomas disponibles
Idiomas disponibles
If you notice any anomaly in the operation of the oven, contact exclusively Effeuno's technical service
department (service@effeuno.biz).
Use the oven exclusively for its intended purpose. Any other use is considered improper and dangerous.
The manufacturer shall not be liable for any damage caused by improper, erroneous, or unreasonable use
of the oven. The oven is intended for professional use only.
THE OVEN IS NOT INTENDED TO BE BUILT-IN OR STACKABLE, NOT EVEN PARTIALLY
3. BEFORE USING THE OVEN
Remove the packaging and check
the integrity of the appliance.
Please keep the original packaging
while testing the oven and for a
short while thereafter.
In this way, in the event of a
malfunction, you will be able to
easily pack the oven to ship it for
repair.
Always
observe
the
distances
indicated in the image on the right.
Before connecting the oven, make sure that the power supply cord is intact and that the information on the
nameplate corresponds with the available electrical grid. An unsuitable voltage may damage the oven. If the
power supply socket is close to the oven, the cords of other appliances must be at a suitable distance from the
hot parts of the oven.
The oven components heat up during use and remain hot for a limited period of time even after the oven is
switched off. Do not touch. The use of adapters, multiple sockets, and extension cords is not recommended. If
adapters or extension cords are necessary, only use components compliant with current safety standards and do
not exceed the current carrying capacity marked on the adapter/extension cord in question. If you notice any
anomaly in the operation of the oven, contact exclusively Effeuno's technical service department.
Page 3 of 12
Publicidad
