KRESS KAC361 Manual Del Usuario página 132

A
J1
25
a
A
J2
HU
A
J3
132
o
b
0 o
MEGJEGYZÉS:
5/32" 4.0mm
A
J4
.
INSPECKING AND
MAINTAINING THE
CHAIN SPROCKET
WARNING: Before check, it is a must to turn
off the pole saw and remove the battery.
1. Remove the dive sprocket cover, saw chain and
guide bar.
2. Check if the wear marks are deeper than
a=0.5mm as shown in Fig. K1, if so, then the
chain sprocket should be replaced. (See Fig. K1)
3. When replace chain sprocket, control the
sprocket with pliers and use screwdriver to
lossen nut and replace it. (See Fig. K2)
A
K1
0.65 mm