Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
Assembly
NOTE:
•
We recommend that you lay out all the barbecue parts next to the assembly
area.
•
Never use excessive force during assembly or when tightening screws/bolts,
as this may damage the product.
•
When assembling parts with multiple nuts or bolts, we recommend loosely
inserting them first, and then, once that particular section of the barbecue
has been assembled, using light pressure to tighten all the hardware.
•
Only tighten all the screws once assembly is complete, as any material
shrinkage may interfere with the final assembly.
Before first use
Clean the product ( CLEANING AND MAINTENANCE).
•
•
Place the product on a stable, flat and non-slip surface.
Use
NOTE: Do not use this barbecue unless all parts are in place. The device must be
correctly installed according to the assembly manual enclosed leaflet.
Connection to the gas cylinder
Cylinder/regulator
•
The gas cylinder (NF compliant for France) can be put on the floor (next to the appliance)
or on the bottom shelf/inside the trolley of your appliance (unless otherwise stated on
the appliance). Indeed, it is necessary to keep a certain distance between the gas bottle
and the burners during use. This is why some low shelves feature a location to put the
gas cylinder by keeping a safe distance from the burners. The standard tablets are not
suitable because the gas bottle is too close to the heating zone.
•
The gas cylinder can be put on the bottom shelf/inside the trolley unless otherwise stated
on the appliance and if its dimensions (included regulator) are according to the following
drawing:
6
EN
Publicidad
