•
Gently move the trimmer in and out of the nostril and at the same time rotate the trimmer.
•
Avoid inserting the cutting unit more than 6mm into your nostril.
TO REMOVE HAIR FROM EAR
•
Follow the diagrams on page 3 and attach the rotary head to the detail trimmer handle.
•
Insert the cutting unit gently into the outer ear canal opening.
•
Gently rotate the trimmer in a circular motion.
•
Avoid inserting the cutting unit more than 6mm into your ear canal.
TO TRIM SIDEBURNS
•
Follow the diagrams on page 3 and attach the precision trimmer head to the detail trimmer
handle.
•
Gently guide the cutting unit to your sideburns holding the unit horizontally at a 90 degree
angle to the sideburns.
•
Trim the sideburns moving the trimmer slowly and carefully, to ensure that you do not
accidentally cut hairs that you do not intend to trim.
•
Note: It is not recommended that you use the trimmer to define or trim the eyebrows.
CARE FOR YOUR TRIMMER
Care for your product to ensure a long lasting performance. We recommend that you clean your
trimmer after each use.
TROUBLESHOOTING
•
The trimmer is not running but has battery power left:
•
If the trimmer is not running it may need cleaning; look for and remove any dried debris from the
cutting blades.
AFTER EACH USE
•
Rinse the accumulated hair from the cutters as noted above. Ensure all debris is removed from
between the blades and shake off excess water.
BATTERY REMOVAL
•
The battery must be removed from the appliance before it is scrapped.
•
Rotate the battery compartment cap approximately ¼ turn anti-clockwise then pull off.
•
Remove the battery from the battery compartment.
•
Place the cap back on the unit opposite to how it came off and rotate clockwise until the cap
snaps into place.
•
The battery is to be disposed of safely.
8