Control Panel Features - LG WM2701H Serie Guia Del Usuario

CONTROL PANEL FEATURES
POWER ON/OFF BUTTON
Press to turn the washer ON. Press again to turn
the washer OFR
NOTE: Pressing the ON/OFF button during a
cycHe will canceH that cycHe and any Hoadsettings
will be Host.
CYCLE SETTUNG BUTTONS
Use these buttons to seHect the desired cycHe
options for the seHected cycHe. Press the button
for that setting untiHthe indicator Bight for the
desired vaHue is Hit.
CYCLE SELECTOR KNOB
Turn this knob to seHect the desired cycHe. Once
the desired cycHe has been seHected, the standard
presets will be shown in the dispHay. These
settings can be adjusted using the cycle setting
buttons anytime before starting the cycle.
START/PAUSE BUTTON
Press this button to START the selected cycle.
If the washer is running, use this button to PAUSE
the cycle without losing the current settings.
NOTE: If you do not press the START/'PAUSE
button within 4 minutes of selecting a cycle, the
washer automatically turns off.
STAUN CYCLE
Select this option for heavily stained clothes,
such as play clothes or work clothes. Stain Cycle
will add extra wash time to the selected cycle, as
well as an additional rinse cycle.
0
@
O
DELAY WASH BUTTON
Press this button to delay the start of the wash
cycle. Each press of the button increases the
delay time by one hour, up to 19 hours.
LED DUSPLAY
The display shows the settings, estimated
time remaining, options, and status messages
for your washer. The display will remain on
through the cycle.
OPTUON BUTTONS
The option buttons aIHowyou to select
additional cycle options and will light when
selected. Certain buttons also aHIowyou to
activate special functions by pressing and
holding the button for 3 seconds.
For detailed information about the individual
options, please see the following pages.
18