Your Air Purifier; Product Overview (Fig.a); Controls Overview (Fig.b); Getting Started - Philips 3000i Serie Manual Del Usuario

2 Your air purifier

Congratulations on your purchase, and
welcome to Philips!
To fully benefit from the support that
Philips offers, register your product at
www.philips.com/welcome.

Product overview (fig.a)

A
Control panel
B Air quality light
C
Air quality sensors
NanoProtect filter Series 3
D
(FY3433)
E
NanoProtect filter AC (FY3432)
F
Pre-filter
G Front panel

Controls overview (fig.b)

H On/Off button
I Light on/off button
J
Auto mode button
K Display screen
L Fan speed button
M
Timer button
N Reset/Child lock button

3 Getting started

Installing filters

Note
• Make sure the air purifier is unplugged
from the electrical outlet before
installing the filters.
• Make sure that the side with the tag is
pointing towards you when installing
the filter.
1
Pull the bottom part of the front
panel to remove it from the
appliance (fig.c).
2
Press the two clips down and pull
the pre-filter towards you (fig.d).
3
Remove all filters (fig.e).
4
Remove all packaging materials of
the air purification filters (fig.f).
5
Put the unpacked air purification
filters back into the appliance
(fig.g).
6
Put the pre-filter back into the
appliance (fig.h).
Note
• Make sure that all hooks of the
pre-filter are properly attached to the
purifier.
7
To reattach the front panel, mount
the panel onto the top of the
appliance first (1). Then, gently push
the panel against the body of the
appliance (2) (fig.i).
8
Wash your hands thoroughly after
installing filters.
EN
5