Before Filling The Bin; Maintenance; Maintenance Guide; Identifying Hazards And Solutions - Swissmex 760110 Manual De Operador

MAINTENANCE

5.
Follow the instructions mentioned below to extend the useful life of the equipment.

5.1 MAINTENANCE GUIDE

Fill the bin up to its designated capacity.
Avoid spills.
Make sure the discharge gate is closed.
Use the ladder carefully to inspect the level of content.
Make sure that no person is up on the ladder when filling the bin.
Close the filling port lid after completing the process.

IDENTIFYING HAZARDS AND SOLUTIONS

6.
HAZARD
Humidity filtration
Equipment instability
The discharge gate is locked

STORAGE

9.
Always store the equipment in a covered area to avoid damage by sun and rain.
CAUSE
1. The upper lid is not closed propperly
2. The bin is perforated
1. The bin is on an irregular land.
2. The land has sand that makes it loose.
1. There is a jam on the gate guides.
2. The guides are broke or rosted.
1. Close the upper lid properly.
2. Patch and paint the perforation.
1. Level the bin.
2. Move the bin.
1. Clean the guides.
2. Replace the guides or fix them.
4
SOLUTION