Notifications, Features And Accessories; Energy Efficiency; Tv Control Buttons & Operation; Switching On/Off - Philips 65HFL2859T/12 Manual Del Usuario

Teletext
Press Text button to view teletext information. Press
again to activate mix mode, which allows you to see
the teletext page and the TV broadcast at the same
time. Press once more to exit. If available, sections
or pages in teletext will become color-coded and can
be selected by pressing the colored buttons. Use
either the navigation or the Programme +/- buttons
to browse the pages. The operation method may differ
depending on the contents of the teletext. Follow the
instructions displayed on the screen.

Notifications, features and accessories

Energy efficiency

This TV is designed with energy efficieny features:
• Energy Saving: You can apply a combination of
energy saving picture settings. While you watch
TV, press the Menu button and, the Energy Saving
settings can be found in the Picture section of the
Main Menu.
• Picture off mode: If you only want to listen to audio
from the TV, you can switch off the display. Other
functions continue to operate normally. While you
watch TV, press Menu button and select Picture,
and from there select the Energy Saving option.
Press Right button while Auto option is selected
or Left button while Custom option is selected. A
message will be displayed on the screen. Select
Proceed and press OK to turn the screen off
immediately. If you don't press any button, the
screen will be off in 15 seconds. Press any button on
the remote or on the TV to turn the screen on again.
Note: Screen Off option is not available if the Mode is set to
Game. Disconnect your TV from the mains plug in case your
TV is going to be inactive for a long time.
TV control buttons & operation
The control buttons on the rear left side of the TV
allows you to control the volume level, change the
channel, the input source and switch the TV into
standby mode or switch it on from standby mode.
1
2
+
3
+
4
1. Standby/On button
2. Source button
3. Programme +/- buttons
4. Volume +/- buttons
Press the Volume +/- buttons simultaneously to
view main menu and use Programme +/- buttons to
navigate and Volume +/- buttons to change value.
Note:
The position of the control buttons may differ depend-
ing on the model.

Switching on/off

To switch the TV on
To switch on the TV from standby mode either:
• Press the Standby button, Programme +/- or a
numeric button on the remote control.
• Press the Standby button or Programme +/- on
the TV.
The TV will then switch on.
Note: If the TV has been left on and not been operated for a
while, the TV will go into standby. When you next switch-on,
the following message will be displayed. "TV switched to
stand-by mode automatically because no operation was
made for a long time", Press OK to continue.

To switch the TV off

Press the Standby button on the remote control or
press the Standby button on the TV, then the TV
switches into standby mode.
Note: To power down the TV completely, unplug the power
cord from the mains socket.

First time installation

You will see the language selection screen when you
first turn on your TV. Select your preferred language
and press OK.
Note: If a USB device is connected to the TV, you can press
the GREEN button on the remote before continuing, in order
to load the NVRAM data (service list, preferences, etc.) from
the USB device which is uploaded from another Philips Hotel
TV. Refer to the "Copy To USB" and "Copy From USB"
sections under the Hotel Mode title on the pages at the end
of this manual.
If the correct software update file is pre-installed in the
USB device, you can press the RED button on the remote
before continuing, in order to upgrade your TV's software.
The software update file should be named as "VES163HE_
upgrade.bin" or "Philips_upgrade_mb120.bin".
Software upgrade via an USB device can be done anytime by
using the hidden key combination, "Menu-1-5-0-5".
On the next screen, set your preferences using the
directional buttons and when finished, press OK to
continue.
You can set up your TV by following the First Time
Installation (FTI) screen with the following selections.
Digital Aerial installation
If Digital Aerial broadcast search option is turned on,
the TV will search for digital terrestrial broadcasts after
other initial settings are completed.
English - 4 -