EDIFIER e255 Manual De Usuario página 5

How to Connect Speakers
Connect to audio sources
Device with RCA output
5
English
Device with optical audio output
↑
Power on/Standby
Basic display configuration
Input source
DOLBY
OPT1 12
PLII
Decoder type
DOLBY D
Dolby D
COMP
or
Make sure on the speaker, display screen on center speaker, subwoofer indicator and surround speaker
status indicator will light up.
Note:
The speaker will display the decoder type depend on the input audio source signal, such PCM, Dolby D
and DTS surround.
Setup guide
Master volume
Dolby Pro Logic II On/Off Status
Dolby D Compression On/Off Status
6
English