EDIFIER e255 Manual De Usuario página 7

Wireless setup and pairing
3. Put surround speakers into pairing mode:
Make sure on all surround speakers.
Press "Pair" key in the back panel of each surround speaker until the indicator on the back panels flash
continuously.
Status indicator
Pair
4.Put subwoofer into pairing mode:
Power on the subwoofer
Then press "Pair" key at bottom of subwoofer until the top of the subwoofer emits a flashing white light.
5. Wait for until 30 seconds while speakers are paired
6. Once pairing is complete, the "P" icon on the display screen of center speaker will disappear and
indicators on surround speakers and subwoofer will remain lit.
9
English
Pair
Pair
Note:
1. Pairing mode will last for 30 seconds. Whether pairing is complete or not the transmitter and receivers will
return to previous status after 30 seconds
2. When switching off transmitter (e.g. center speaker is in standby mode), the paired speakers (surround
speakers and subwoofer) will automatically enter standby state (Note: speaker maintains power consumption
lower than 0.5W in standby mode)
3. Surround speakers and subwoofer light indicator status as follows:
Speakers
Connected
Surround left
The indicator is
satellite speaker
constantly lit RED
Surround right
satellite speaker
Subwoofer
Wireless setup and pairing
Status
No connection Pairing
The indicator flashes The indicator
in a pulsing pattern continuously flashes
10
English