YEAZ SUP Board Manual Del Usuario página 21

CAUTION: Remove the valve cover only to inflate/deflate the air. This
prevents accidental air leakage and the ingress of any particles into the
valve.
Now start to gently roll the board from the front side towards the valve to
release the remaining air from the board. Put the valve cap back on and
close it tightly to prevent dirt and moisture from entering. Now unfold the
Stand Up Paddleboard again and start rolling it in from the other side where
the valve is located. This way the board folds better and the fins are better
protected at the same time. Place the foam pads provided on the fixed fins
for protection.
CLEANING
Clean and check the board and accessories (including paddles) after each
use. Rinse everything thoroughly to ensure that any residue or salt residue
(when used in salt water) is removed. Use mild soapy water. Do not use
detergents or silicone based cleaners. Make sure the paddleboard is
completely dry before storing.
STORAGE
Please store your board in a clean and dry place, protected from major
temperature fluctuations and other harmful factors. You can roll up the
board with deflated air or in a slightly inflated state. Protect the board from
rodents. Disassemble the paddle into its individual components and store
them separately to allow drying.
21