SilverCloud YR300 Manual De Usuario página 2

EN
1. FUNCTIONS:
- It supports electrical control or hand operation.
- It is compatible with door phones or access control systems.
- It can be mounted in residential or commercial buildings, hotels, warehouses, schools etc.
2. INSTALLATION:
- Use the self-contained screws to install the lock body, cylinder and door holder into the door or door frame. Reccomended at
least 5 mm installation distance from lock body to door holder.
- The cylinder should be mounted on the outside of the door (opposed to the lock) with the accessories included. The axis of
the cylinder must pass through the door to the special slot in the lock body. To open the lock, it is sufficient for a short turn of
the key in the cylinder.
- The loading spring is adjustable with the door's weight or door's closer power. Adjust the hexagonal nut with a spanner no.
12 if it locks in a big noise or cannot close.
- Deadbolts could change direction according to the open type (left or right)
- Use a 7 - 12 d.c. voltage and a power higher than 12 W. By pushing the button, the electric lock unlock after 1 second.
NOTES:
- Unlock continuous electrify time must not exceed 8 seconds.
- For safety, please use powdery lubrificant for the cylinder
4. EXAMPLE OF INSTALLATION SCHEME:
2