Symbols; Assembly - Hoover ONE PWR BH57200 Manual Del Usuario

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL
Eye and Hearing
Protection
Unpacking
This product requires assembly.
Carefully remove the product and any accessories from
the box. Make sure that all items listed on the box are
included.
WARNING!
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
or with damaged or missing parts could results in serious
personal injury.
• Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
• Do not discard the packing material until you have
carefully inspected and operated the product.
If any parts are damaged or missing, please call
1- 800-406-2005.
NAME
Always wear eye protection with side shields marked to comply with
ANSI Z87.1 along with hearing protection when operating this equipment.

SYMBOLS

DESIGNATION/EXPLANATION

ASSEMBLY

Do not attempt to modify this product or create accesso-
ries or attachments not recommended for use with this
product. Any such alteration or modification is misuse
and could result in a hazardous condition leading to pos-
sible serious personal injury.
Assembling the Blower Tube
See figure 2, page 8
To avoid serious personal injury, always remove the
battery pack from the product when connecting or dis-
connecting blower tube.
• With the logo area facing up, slide the blower tube over
the outlet on the blower housing.
• Press down on the tab on the blower housing outlet.
• Push tube on the blower housing outlet until tab locks
into place through the slot in the blower tube.
• To remove the blower tube, push the tab down and slide
the tube off.
WARNING!
WARNING!
PG.4