•
video is automatically displayed on your
TV, and
•
audio is automatically played on this
product.
1
Using a High Speed HDMI cable, connect
the HDMI OUT connector on your digital
device to the HDMI IN on this product.
•
A High Speed HDMI cable is
recommended.
2
Connect this product to TV through HDMI
OUT (ARC).
3
On the connected device, turn on HDMI-
CEC operations.
4
Press HDMI IN on the remote control
of this product to enable the HDMI IN
connection.
•
If the TV is not HDMI CEC compliant,
select the correct video input on your
TV.
•
For HDMI-CEC issues on your TV, see
the TV user manual and ensure the
HDMI-CEC setup is correct, or contact
the TV manufacturer if needed.
EN
10
4 Use your
product
This section helps you use this product to play
media from a wide range of sources.
Before you start
•
Make the necessary connections described
in Quick start guide and User manual.
•
Switch this product to the correct source
for the other devices.
Set clock
Through clock setting, you may select a type of
standby (ECO standby without clock display, or
normal standby with clock display ).
1
Switch this product to standby (press ).
» --:-- (or clock) is displayed.
2
Press and hold
setting mode.
» --:-- blinks.
3
Press Volume +/- to select 12 hour
or 24 hour format, then press
confirm.
» The hour digits begin to blink.
4
Press Volume +/- to set the hour, then
press
to confirm.
» The minute digits begin to blink.
5
Press Volume +/- to set the minute, then
press
to confirm.
» ECO begins to blink.
6
Press Volume +/- to select "ECO" or
"CLOCK", then press
» If you select "ECO" , in standby, the
clock is displayed for 1 minute then the
display is switched off.
» If you select "CLOCK", in standby, the
clock is always displayed.
to activate the clock
to
to confirm.