SOMFY TaHomaPad io Manual Del Instalador página 49

6.2.3. Detecting new end-products or end-products without a registered control point
- Follow the instructions that appear on the screen to detect
all new io-homecontrol
without a registered control point in the installation.
6.2.4. Detecting sensors
- Once the new io-homecontrol
‡ If the installation includes sensors, click on "Yes".
‡ If not, click on "No" and go directly to the &RQ¿JXULQJ WKH KRXVH section.
- Follow the instructions that appear on the screen to detect all of the Somfy io-homecontrol
in the installation (temperature, sunlight, wind sensors).
- When the TaHoma Pad io has recognised all the sensors, click on "Continue".
detecting sensors
We will now proceed with detection of all the
sensors in the installation. Does your installation
contain sensors?
Copyright © 2013 Somfy SAS. All rights reserved.
®
end-products or all io-homecontrol
®
end-products present in the installation have been detected:
FIRST START
1
2 3 4
yes no no
DASHBOARD stop
®
1
detecting devices - 1W
TaHoma Pad io is looking for a device or
devices in the installation that is (are) stored
in the employed control.
Please wait ...
DASHBOARD
FIRST START
1
2 3 4
detecting
sensors
The step entailing detection of the sensors
in the installation was successful.
next
DASHBOARD
TaHoma Pad io
6
10
stop
® sensors
stop
7