It is possible to increase or decrease the
remaingin freezing period acting on the timer in
whatever moment.
-
When the consistency of the product has
reached the required level, put the timer on
zero.
-
Then stop the machine by lifting the cover
and start extracting the product.
extraction becomes difficult due to insuffient
mass, close the cover again, let the beater
run in order to better collect the mass for an
easier drawing.
4.3 Production of coffee-granita
The coffee-granita is a delightful speciality
which requires for its preparation a cyclic
agitation which maintains its classic dark colour.
For this reason the machine is equipped with a
special program which permits the production of
granita with a minimum air incorporation.
For selecting the program "cyclic agitation"
proceed as follows:
-
Pour into the machine the required mix as
already previously explained
-
Press the pushbutton ON-OFF and verify
that the led is green
-
Press the pushbutton "cyclic agitation" and
verify that the led is green. In this function
the agitator will stop for at about 57 sec. and
and works for at about 3 sec.
-
Regulate the freezing timer as explained
previously in order to start the production.
-
Once finished the production, desactivated
the program "cyclic agitation" by pressing
the respective pushbutton and check that
the led is grey.
-
Switch off the machine and extract the
product from the cyclinder.
If the
ENGLISH - 10