Quick Setup - ION Holiday Party Smart Guia De Inicio Rapido

Quick Setup

1. For optimal coverage, place the light at 15 ft. from the distance you are trying to
illuminate. This will provide coverage for an area 80 ft. (24.4 m) wide by 50 ft. (15.2 m)
high.
2. Grasp the stake to insert Holiday Party Smart into the ground. Alternatively, if using
Holiday Party Smart on a flat surface, unscrew the thumbscrew to remove the stake, and
attach the stand in its place.
3. Connect the power cord into a standard wall socket or extension cord rated for outdoor
use. Holiday Party Smart will automatically turn on when plugged in. Use the remote
control or the Holiday Party Smart app on your smartphone to turn the unit on and off, or
to set an automatic timer. Unplug when not in use.
4. Turn the thumbscrew to loosen, angle the fixture either up or down, and tighten the
thumbscrew at the desired projection angle/area. If the lights are spilling onto a
neighboring house or structure, try placing the light closer to the object you want to
illuminate.
Note: The darker the area the light is being used in, the brighter the projection. Try to stay
away from areas with street lights and other bright lights.
5