Function Mode; System Info - TECshow HALO 712 XL Manual De Usuario

6

System Info

5. FUNCTION MODE

DMX Address
With this function, you can adjust the address from
001 to 512, Press the UP or DOWN buttons to find
your desired address. Press ENTER to set your de-
sired DMX address.
DMX Channel
The LED moving head have 8CH and 15CH.
Running Mode
In the Running Mode, it show (DMX), (Auto), (Sound)
and (Slave) mode on the display, you can choose
the mode to run.
Programs
With this function, you can run the 8 Inside program
with master mode.
Settings
(1) Pan Rev
With this function you can reverse the Pan-move-
ment.
(2) Tilt Rev
With this function you can reverse the Tilt -movement.
(3) Display Rev
With this function you can reverse the
display-movement.
P. 6
Tecshow Halo 712 XL | English version
Reset Motor (Reset all Motor)
Software
Mode DMX
Address 001
(4) Sensitivity
This function is for sound-controlled, you can ad-
just the value from 0 to 100, the value is more high,
Sensitivity is more better.
(5) Dmx Fail
In this function you can check the problem of the
DMX, if the DMX meet the problem, it have OFF and
Hold for select.
(6) Calibration
Enter into this function, have each items Calibration.
(7) Factory Reset
With this function, you can select Factory Reset for
Yes or NO, the default is NO.
(8) Reset Motor
Enter into this function, all Motor will Reset to the
original.
System Info
In this function, you can check the detail for the
(Software), (Mode) in DMX, (Address) value 001.