AVANT DG2450SS Manual De Instrucciones página 21

BURNERS AND GRIDS
✓
These parts can be removed and cleaned with appropriate products.
✓
After cleaning, the burners and their flame distributors must be well dried and correctly replaced.
✓
It is very important to check that the burner flame distributor and the cap has been correctly
positioned - failure to do so can cause serious problems.
✓
In appliances with electric ignition keep the electrode clean so that the sparks always strike.
✓
Note: To avoid damage to the electric ignition do not use it when the burners are not in
place.
CORRECT REPLACEMENT OF THE BURNERS
It is very important to check that the burner flame spreader "F" and the cap "C" have been correctly
positioned. Failure to do so can cause serious problems.
In appliances with electric ignition, check that the electrode "S" is always clean to ensure trouble-free
sparking.
The ignition plug must be cleaned very carefully.
OVEN RACK INSTALLATION AND REMOVAL
The oven racks are provided with a
safety catch to prevent accidental
extraction.
They must be inserted as shown.
To pull them out remove the rack in
the reverse order.
Do not use steam jet cleaners
because the humidity could
infiltrate into the appliance
making it dangerous.
21