Oster BCSTFP0000 Manual De Instrucciones página 8

Sterilizing
7
English
IMPORTANT:
• Bottles, accessories, toys and other objects should
be cleaned before sterilizing.
• This sterilizer does not sterilize up to clinical
standards.
• Place the appliance on a flat and stable surface.
• Make sure the appliance and power cord are out
of children's reach.
• Ensure drain plug is secured to prevent leaking
during sterilizing.
1. fill the water reservoir (13) with filtered and
distilled water to water level 3.
2. lock the water reservoir lid (14) into place on
the water reservoir (13) by twisting the double
arrow icon counterclockwise until the sterilizer
icon is aligned with the arrow
3. Place the bottle tray (20) into the sterilizer base (21).
* Place cleaned baby bottles upside down onto the
bottle tray (20).
4. Place the accessory tray (19) over the bottles, onto
the top interior edge of the sterilizer base (20).
* Place accessories disassembled on top of the
accessory tray (19).
5. cover with the sterilizer lid (18), slide sterilizer
towards the oster
until the sterilizer steam entry (23) engages with
the water reservoir steam guide (15).
6. Plug the power supply cord into an electrical outlet
and press the on/off button
* a 1-second beep and power light will indicate the
oster baby nutrition center is on.
®
7. Press the steam button
* a 1-second beep and illuminated steam light will
indicate stERiliZinG has begun. sterilizing can
be stopped at any time by pressing the
steam button
WARNING:
during steaming, the sterilizer
releases steam through the steam vent holes on
the top of the sterilizer lid. to avoid injury, keep
clear of the steam.
8. stERiliZinG is complete when a 3 second beep
has sounded and the steam light turns off. the
oster baby nutrition center appliance is now in
®
stand-by mode and the heating element is off.
9. Press the on/off button
* the power light turns off, indicating that the
oster baby nutrition center is off.
®
10. Remove sterilized bottles and accessories as
required for feeding.
sterilizing. allow sufficient time for the sterilizer lid,
bottles and accessories to cool before handling or
use oven mitts to handle immediately.
11. Remove the drain plug (22) located on the bottom
of the sterilizer base (21) to release excess
condensation after sterilizing.
water is hot. allow water to cool before draining.
at the base.
baby nutrition center base
®
(10).
(11).
(11).
(10).
WARNING
: Parts are hot after
WARNING
: sterilized