Panacom RAVE SOUND SP-3360A Manual Del Usuario página 5

HOW LISTEN VIA WIRELESS
1. Find the input knob on the front panel then put it to the USB/SD position
2. Find the button mode on the top panel until you hear two beeps indicating that the function
is active.
3. Active the wireless function of your mobile and the search for new devices.
5. Now and only load and play your favorite songs.
CONNECTING A SMARTPHONE WITH ONE TOUCH(NRC)
When you touch the system with an NRC-compatible smartphone, the system automatically:
-Turns on in wireless function.
-Completes pairing.
-Completes the wireless connection
2. Turn on the NRC function in your smartphone setting.
3. Touch the smartphone to the NRC mark on the control panel until the smartphone vibrates.
light up.
Remark: The unit should have been connected with the smartphone by wireless connection
before using the one touch ( NRC) function. For details, refer to the operating instruction of
wireless connection.
IMPORTANT NOTES
3. Don't turn ON and OFF the power frequently. Please wait for 3 seconds before turn ON
and OFF again.
4. To fully enjoy the sound preformance of the system, the speaker impedance should be no
more than the rated impedance range.
SPECIFICATIONS
Output power: 60W
Frequency Response: 20HZ-20KHz+1.5dB
THD: <0.2%
S/N: 86dB
Bass Control: +10dB (100Hz)
Treble Control: +10dB (10KHz)
Power supply: AC 220-240V / 50-60Hz
Dimensions: 36.2*26*60.1cm
Made in china
ll out the power cord
Pg. 5