Hair Dryer - Ideeo HT 0960 Instrucciones De Uso

GB
Connection to the mains supply
The hair dryer should only be connected to an earthed socket installed in
accordance with the regulations.
Make sure that the supply voltage corresponds with the voltage marked on the
rating label of the hair dryer.
This product complies with all binding CE labelling directives.
Familiarisation
1. Air intake opening
2. Cool function
3. 2-position switch
4. Hanging loop
5. Power cord with plug
6. Volume diff usor
7. Professional styling nozzle
8. Air outlet grille
Important safety instructions
✦
Before using the appliance, the user should read the following instructions
carefully.
✦
Caution: do not use the appliance near bath tubs, washbasins or any
other receptacle containing water.
Protect the appliance from moisture and splashing water and do not
operate it with wet hands.
✦
In the vicinity of any water source, there is a risk even when the appliance is
switched off . Therefore, always remove the plug from the wall socket after
use, especially if the appliance is being used in a bathroom.
✦
Additional protection is available by fi tting an earth-leakage circuit-breaker
with a rated tripping current not exceeding 30mA into your bathroom
installation. Please consult a qualifi ed electrician.
✦
Electric heating appliances operate at very high temperatures. Do not touch
any part of the appliance except the grip. Otherwise there is a real risk of
burning.
✦
Do not use the appliance on synthetic hair-pieces or wigs, as the heat emitted
might cause damage to the synthetic fi bres.
✦
Make sure the air intake and outlet openings are not blocked (e.g. by fi ngers
or hair), and that no fl uff or fi bre particles are allowed to accumulate in the
7

Hair dryer