Ideeo HT 0960 Instrucciones De Uso página 9

Styling nozzle
The styling nozzle can be fi tted to the air outlet to facilitate shaping the hair
during blow drying.
Volume diffusor
The volume diff usor is also fi tted to the air outlet.
The volume diff usor is used to maintain the volume of the hair. Move the diff usor
with a slightly circular motion over the head.
2-position switch
The hair dryer has a 2 position switch:
Position 0 = off
Position 1 = warm air (for styling)
Position 2 = hot air (for drying)
Cool function
The cool function can be used at any time during the drying process. It will supply
cooler air, which helps fi rming and shaping the hair.
Operation
Connect the hair dryer to a suitable wall socket and use the slide switch to select
the desired power setting.
Cleaning and care
✦
Before cleaning the hair dryer, remove the plug from the wall socket and let
the appliance cool down completely.
✦
To avoid the risk of electric shock, do not clean the hair dryer with water nor
immerse it in water.
✦
If necessary, the housing of the hair dryer may be wiped with a dry lint-free
cloth.
✦
Always check the air intake openings for accumulated lint particles or hair
and - if necessary - remove any found. To facilitate cleaning, the grille on the
air intake can be removed by turning it anti-clockwise and then lifting it off .
After cleaning, replace the grille and lock it by turning clockwise.
Disposal
Do not dispose of old or defective appliances in domestic garbage; this
should only be done through public collection points.
Guarantee
This product is guaranteed against defects in materials and workmanship
9