Craftsman 536.889252 Manual Del Usuario página 14

[o_o)_
The operation of any snow thrower can
result in foreign objects being thrown
into the eyes, which can result in se-
vere eye damage. Always wear safety
glasses or eye shields while operating
the snow thrower.
We recommend standard safety
glasses or a wide vision safety mask for
over your glasses.
_b ARNING: Read Owner's
Manual before operating
machine. Never direct dis-
charge toward bystanders. Stop the
engine before unclogging discharge
chute or auger housing and before
leaving the machine.
TO STOP YOUR
SNOW THROWER
1. To stop throwing snow, release the
auger drive lever. See Figure 14.
2. To stop the wheels, release the
traction drive lever.
3. To stop the engine, push the
throttle control lever to off and pull
out the safety/ignition key.
TO CONTROL SNOW DISCHARGE
1. Move the electric chute switch to
set the direction (left to right) of the
snow throwing.
2. Push the remote chute lever for-
ward to discharge the snow down.
Pull the remote chute lever back to
discharge the snow high and far.
HOW TO MOVE
FORWARD AND BACKWARD
1. To move the snow thrower forward,
engage the traction drive lever
(left hand). As the snow thrower
starts to move forward, push the
8hift lever to the desired speed.
Maintain a firm hold on the handles
and guide the snow thrower along
the clearing path. Do not attempt to
push the snow thrower.
2. To move the snow thrower back-
ward, pull the shift lever to the re-
verse position.
TO THROW SNOW
1. Push down the auger driver lever
(right hand). See Figure 14.
2. Release to stop throwing snow.
Auger Drive Lever
\
Shift Lever
Traction Drive Lever
Remote Chute Lever
Figure 14
F-041074L 14