After Steam Cleaning; Cleaning The Appliance; Troubleshooting By Yourself - SEVERIN ST 7181 Manual De Instrucciones

After steam cleaning

Immediately after steam cleaning
4 After steam cleaning

Cleaning the appliance

– Before cleaning, switch off the appliance and disconnect the plug from the outlet.
– The housing and power cable may not be handled with liquids or immersed in liquids for reasons
of electrical safety. Rub housing with a slightly damp cloth and then dry.
– For cleaning, do not use any sharp or scouring cleansers or hard brushes.

Troubleshooting by yourself

To avoid problems it is important to use the appliance in accordance with this instruction manual.
1. Pull plug from outlet. The LED goes off.
2. Wrap cable (Quick Start Guide, page 4).
3. Wait at least 5 minutes until the cleaning cloth is cooled
down.
4. Remove cleaning cloth. Allow cleaning cloth to dry or
wash at max. 60 °C. Do not use fabric softener.
Do not bleach. Do not put in dryer.
illustrated Quick Start Guide (Page 3).
If you still have problems with the appliance, first visit us on the Internet at
www.severin.com/go/to/8367 under "FAQs" and try to fix the problem by
yourself.
Use this QR code to reach our home page directly. If this does not help,
contact our customer service. The contact data is in the appendix to this
instruction manual or on our home page.
17