Sleeping Function - Panasonic CZ-RTC2 Manual De Instrucciones

6. Sleeping Function

* This function leads you to a comfortable sleep
and changes the room temperature during your
sleep.
* You can set the off timer every one hour from 1
to 10 hours.
Operating time Display of remote control unit
Sleeping function
indication
Display of remote control unit
(during sleeping function setting)
Sleeping function indication
* If no operation is made for 3 minutes, the time
setting mode will be automatically fi nished.
Ex. In case of 7 hours timer
1. Press
• Each time the button is pressed, the indication
changes in the following order.
(Press
2. Press
• The sleeping operation starts.
CZ-RTC2_Main.indb EN-13 CZ-RTC2_Main.indb EN-13
(during the time setting)
Off time In case the present time
is 23:00.
.
(every one hour)
to stop the time setting.)
.
When the off time comes:
• The indoor unit stops.
* The temperature returns to the setting at
the time when sleeping function operation
started.
To cancel the sleeping function operation:
• Press .
* The temperature setting remains at the
time cancelled.
• The following buttons also cancel the
sleeping function operation.
button
Stops the indoor unit after the sleeping
function operation is cancelled.
button
Changes the operation mode after the
sleeping function operation is cancelled.
EN-13
EN
2011/11/04 20:08:01 2011/11/04 20:08:01