Rear View; Front View - Akiyama XCEED Manual De Usuario

Xceed user manual. Description of the functions. Rear view.
DESCRIPTION OF THE FUNCTIONS

Rear View

1
DIGITAL OUT LINE OUT
2
L
REMOTE
3
R
1. LINE OUT (RCA Jacks)
The analogue audio from each CD player is output from these
jacks. Connect to the line input of the mixer.

Front View

LCD INSTRUCTION
1
3
2
5 6 4/8
1. TOTAL TRACK - It shows the track numbers of this CD. During
selecting folders, it shows the total folders of this CD.
2. - The unit is in play.
3. - The unit is paused
4. CUE - It indicates a cue has been memorized.
5. CD - Lights when switching the play source to CD mode.
6. USB - Lights when switching the play source to USB mode.
7. PC - No Function.
8. CUE - Lights up when a memorized point exists.
9. CONTINUE - When the light is on, the playback goes without
interruption.
10. TIME MODE (ELAPSED) - Shows the time as it is taking place.
11. TIME MODE (TOTAL) - Shows how much time is left on the full
CD.
12. TIME MODE (REMAIN) - Shows how much time is left on a
particular track.
13. TIME BAR – Show the time length depending on the setting of
the "TIME" mode.
POWER
6
AC IN
5
ON OFF
XCEED
CD/USB MEDIA PLAYER
RELAY
AC 230V - 50Hz22W
MADE IN CHINA
CD/USB MEDIA PLAYER
4
AKIYAMA.08191 BARCELONA (SPAIN)
1
2
14 13 9
7 18 15
2. DIGITAL OUT
The digital audio from each CD player is output from this jack.
Connect to the line input of the D/A Amplifier.
3. REMOTE
This connector is used for connecting to FADERSTART wire
remote control unit.
4. RELAY CONNECTOR
This connector is used for connecting to another CD player to
allow Relay function to work.
5. POWER (Power Switch)
Press the power switch to turn the unit on, and the LED indicator
will be light. To switch the POWER off by pressing the POWER
switch again.
6. AC POWER CORD
Connect this power cord into an AC wall outlet with the proper AC
voltage.
1. POWER ON LIGHT
It lights when the power is on.
2. DISC SLOT
Insert or remove the disc.
10 11 12
16 17 20
14. TRACK - Shows the track number that is playing.
15. MINUTES - Shows the elapsed or remaining minutes
depending on time mode setting.
16. SECONDS - Shows the elapsed or remaining seconds
depending on time mode setting.
17. FRAMES - The CD Player breaks down a second into 75
frames for accurate cueing. This shows the frames elapsed or
remaining depending on mode setting.
18. MODE DISPLAY - Show the sound effect name, or MP3 file
name /Folder. Folder name can not be displayed.
19. PITCH - Lights to indicate the pitch value is under it.
20. PROG - Lights to indicate there's a program list existing in
normal playback. Blinks when the program list is performing.
21. MT - Lights up when performing master tempo function.
22. RELOOP - Lights up when performing the loop function.
23. - Shows BPM value.
24. BPM - Illuminates when the power is on.
25. AUTO - Lights up when AUTO BPM function is activated.
16
19 21
22 23 25 24