Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
1
2
4 5
3
1. LINE OUT (RCA Jacks)
The analogue audio from each CD player is output from these jacks. Connect to the line
input of the mixer.
2. DIGITALOUT
The digital audio from each CD player is output from this jack. Connect to the line input
of the D/AAmplifier.
3. TACT-LOCK option
Select the type of switch in the mixer for FADERSTART wire remote control.
5
4. Remote
This connector is used for connecting to FADERSTART wire remote control unit.
5. Relay Connector
This connector is used for connecting to another CD player to allow Relay function to
work.
6. POWER (Power Switch)
Press the power switch to turn the unit on, and the LED indicator will be light. To switch
the POWER off by pressing the POWER switch again.
7.AC Power Cord
Connecting this power cord into anAC wall outlet with the properAC voltage.
4
REAR PANEL
6
7
END PANEL
1
2
1. POWER ON LIGHT
It will light when the power turns on.
2. DISC SLOT
Insert and remove the CDDA disc.
TOTAL TRACK
FOL
CUE
CD USB
PC
TOTALTRACK
1.
The unit is in playing.
2.
The unit is paused
3.
It indicates a cue has been memorized.
CUE
4.
CD
When inserting a CD, it will automatically light on.
5.
+ info pag.
USB
No Function
6.
No Function
PC
7.
AUTO-CUE
8.
Continue
When the light is on, it plays continually
9.
TIME MODE (ELAPSED)
10.
TIME MODE (TOTAL)
11.
TIME MODE (REMAIN)
12.
TIME BAR
13.
Shows the track number that is playing
TRACK
14.
MINUTES
15.
SECONDS
16.
The CD Player breaks down a second into 75 frames for accurate cueing.
FRAMES
17.
This shows the frames elapsed or remaining depending on mode setting.
EFFECT MODE DISPLAY
18.
name can not be displayed.
THE PARAMETER OF SOUND EFFECT
19.
PITCH
The pitch change range.
20.
PROG
Lighting up when it's playing the program. Blinking when making the
21.
program edit.
Lights up when key has been locked.
MT
22.
RELOOP
The light is on when performing the loop function.
23.
Press the TAP button with the beat can show a BPM number.
24.
Lighting on when turning on the power.
BPM
25.
AUTO
No function.
26.
LCD INSTRUCTION
Auto-CUE CONT NUE ELAPSED TOTAL REMA N
TRACK
DER
T T L
E
A
L
B
U
M
A R T S T
It shows the track numbers of this CD.
To auto pause on the CUE point of the next track
Shows the time as it is taking place
Shows how much time is left on full CD.
Shows how much time is left on a particular track.
Show the time length depending on the setting of the "TIME" mode.
.
Shows the minutes elapsed or remaining depending on mode setting.
Shows the seconds elapsed or remaining depending on mode setting.
Show the sound effect name, or MP3 file name. Folder
P TCH
PRO
MT
RELOOP
A
U
T
O
B P M
.
.
Publicidad
Tabla de contenido
