S-PREMIUM User's manual
EN 5
1.3.
wARNINGS
IF THE PACKAGING IS DAMAGED, CONTACT THE TRANSPORT AGENCY
IMMEDIATELY AND YOUR DISTRIBUTOR BEFORE INSTALLING THE
BOOTH. DO NOT DISPOSE THE PACKAGING UNTIL THE CORRECT
FUNCTIONING OF THE PRODUCT HAS BEEN THOROUGHLY CHECKED.
Ensure the door is sealed before each audiometric test.
Use the fairlead, placed next to the table, to connect the audiometer and
the accessories. Once the wires have been leaded by the fairlead, it must be
screwed to avoid attenuation loss.
The lateral gutters can be used to connect the speakers and make the free
field tests. The final connection will be done depending on each audiometer.
1.4.DISPOSAL OF ELECTRICAL AND ELECTRONIC EQUIPMENT BY
DOMESTIC USERS IN THE EUROPEAN UNION
The
S-PREMIUM
booth must be disposed properly; it may need to be
recycled in accordance with the statutory requirements in your country.
• Materials according RoHS Directive: the product and its accessories are
RoHS compliant.
• Electrical and electronic waste according to WEEE Directive (2002/96/CE):
the user is the responsible of disassembling the electrical and/or electronic
components of the booth and delivering them in a recollecting point of electric
and electronic devices.
Information on proper disposal is available from SIBEL's After Sales Service
or your dealer.
501-900-MUM · Rev 1.01