Rear Panel - Denon Professional DN-700CB Guia Del Usuario

Rear Panel

2
1
1. Outputs (unbalanced RCA): These outputs send the audio signals from a CD, auxiliary device, USB
drive, network connected device, or Bluetooth device. Use RCA cables to connect these outputs to
external speakers, sound system, etc. See
2. Outputs (balanced XLR): These outputs send the audio signals from a CD, auxiliary device, USB
drive, network connected device, or Bluetooth device. Use XLR cables to connect these outputs to
external speakers, sound system, etc. See
3. AC In: Use the included power cable to connect this input to a power outlet. See
4. Bluetooth Connector: Attach to this BNC connector either the Bluetooth Straight Antenna or
Bluetooth Remote Antenna (both included). Either antenna will receive and transmit the Bluetooth
signal from a paired Bluetooth device with a range of up to 82 feet (25 meters). See
diagram.
5. Ethernet Port: This port can be used for controlling DN-700CB through the web interface. The port
also allows you to play audio files from a computer or other device. See
Control and Playing Audio Files on a Network Connected Device
for a diagram.
6. Remote Input: This input lets you connect a host device (usually a computer) to DN-700CB. You can
use the host device to control DN-700CB via RS-232C serial communication. See
Remote Control
7. Rear USB Port: Connect a USB storage device to this port when updating the firmware on DN-
700CB.
8. Operation Switch: For standard playback, leave this switch at the "Normal" position. If updating the
unit, set this switch to the "Update" position.
8
4 5
for more information.
7
6
8
Setup for a diagram.
Setup for a diagram.
3
Setup for a diagram.
Setup
Operation > Web Interface
for more information. See
Operation > Serial
for a
Setup