Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
SP-18 AT-2
English instruction manual
Specifications
Display Size: 37" to 65"
Maximum Load: 45 kg (100 lbs)
Mounting Pattern: 600 mm x 400 mm (23.6" x 15.7") max
Tilt Range: up to 15° down
Pan/Swivel Range: up to 180°
Profile: 7.0 cm to 32.0 cm (2.8" to 12.6")
Box contents
Mount (x1)
Vertical Bar (x1)
Horizontal Bar (x2)
Instruction Manual (x1)
Hardware Kit (x1)
Cable Clip (x1)
Warnings
Read these instructions before you begin. If you are unsure of any part of the process,
contact a professional contractor or installer for assistance. Improper installation can
result in injury or damage.
The wall or mounting surface must be capable of supporting the combined weight of
the mount and the display; if not, the structure must be reinforced.
Locate pipes, wires, or any other hazards in the wall where you wish to install the mount
before drilling.
Safety gear and proper tools must be used. Failure to do so can result in injury / damage.
Two people are recommended for installation. Do not attemptto lift a heavy display wi-
thout assistance.
Follow all instructions and recommendations regardingadequate ventilation and suita-
ble locations for mounting yourdisplay. Consult the owner's manual for your particular
display for more information.
CAUTION: This wall mount is intended for use only with the maximum weight of 45 kg
(100 lbs). Use with heavier than the maximum weights indicated may result in instabi-
lity causing possible injury.
11
Publicidad
Tabla de contenido
