Premier SX-5476TVD Manual De Instrucciones página 29

1.7 MP3 Lyrics
ON:When display this will show the lyrics on the screen
OFF:When display this will off the lyrics.
2. AUDIO SETUP PAGE
2.1 SPEAKER SETUP
2.1.1 SPDIF OUTPUT
OFF: There will be no digital audio signal output.
PCM: The digital audio signal output will be in PCM format. Normally, this mode is used for audio CD
signals.
2.2 DIGITAL SETUP
2.2.1 DUAL MONO
STEREO: The player outputs the left channel audio and right channel audio via FL ad FR speaker
respectively.
L-MONO: The player outputs the left channel audio only via both the FL ad FR speaker.
R-MONO: The player outputs the right channel audio only via both the FL ad FR speaker.
MIX-MONO The player outputs the average signal of the left channel and right channel audio via the FL
speaker and FR speaker.
NOTE: This function only applies to the Digital signal 2 channel discs.
2.3.2 DYNAMIC
When you watch films with large dynamic scope in low volume, for example at night, you can adjust the
dynamic value up to avoid losing sound details resulted from the low volume.
3. VIDEO SETUP PAGE
This menu is used to setup the picture quality of LCD of the unit.
3.1 Panel
Adjust these items by your perference.
3.1.1 SHARPNESS
There are three options (HIGH, MEDIUM and LOW) for you to choose in this item.
3.1.2 BRIGHTNESS, CONTRAST, GAMMA, HUE and SATURATION, LUMA DELAY
Enter these items respectively, use direction key [LEFT]/[RIGHT] to adjust the value, the press [ENTER]
to confirm it.
4. PREFERENCE SETUP
If there is no disc in the disc tray, the disc tray is open or the disc in the disc tray is stopped, this item is
available.
4.1 PBC (PLAY BACK CONTROL)
ON: Activate the PBC function. When playing disc encoded with PBC function such as VCD 2.0, SVCD
etc, press [MENU] to return to the PBC menu.
OFF: Disable the PBC function.
P-12