Maintenance Instructions - Makita UV3600 Manual De Instrucciones

• Be especially careful when
turning the machine on a slope.
• Never work on a steep slope.
• Pay extreme attention when
reversing or pulling the machine
towards you.
• Do not overreach. Keep proper
footing and balance at all times.
This enables better control of
the machine in unexpected
situations.
• Never operate the machine while
people, especially children, or
pets are nearby.
• Always remember:
– Keep your feet away from
the cutting tools.
– Do not tilt the machine.
– Do not stand in front of the
discharge opening.
– Never let your hands or other
part of the body or clothing
place near moving parts.
• Do not force the machine. It does
the job better and safer at the
rate for which it was designed.
Frequent overload may cause
motor damage or fire.
• Switch off the motor and
unplug:
– Whenever
machine unattended
– Before clearing a blockage
or any fault
– Before checking, cleaning or
working on the machine
– Before
adjustments,
accessories or storing
leaving the
making any
changing
– When the machine hits a
foreign object. Wait until
the machine cools down.
Inspect the machine and
replace the parts if needed
before continuing operation
– Whenever
starts vibrating or making
noise unusually
– When attaching or removing
grass catcher
– When someone enters your
working area
– When crossing surface other
than grass
– When transporting.
• Stop the cutting tool:
– If you have to tilt the
machine
– When crossing surfaces
other than grass
– Transporting the machine
to and from surfaces to be
worked.
• Pay attention to the cutting tools.
They do not stop immediately
after switch off.

Maintenance instructions

• Have your machine serviced by
our authorized service center,
always using only genuine
replacement parts. Incorrect
repair and poor maintenance
can shorten the life of the
machine and increase the risk of
accidents.
• Inspect the machine on regular
base.
the machine
9