Dear Customer,
Before using the appliance, the user must read
the following instructions carefully.
Connection to the mains supply
Make sure that the supply voltage corresponds
with the voltage marked on the rating label of
the appliance. Th is product complies with all
relevant CE-labelling directives.
Components
1.
Cover
2.
Attachment for foot refl ex zone
massage
3.
Power cord with plug
4.
Rotary control switch
5.
Rating label (on underside of unit)
6.
Water level mark
7.
Recesses for emptying-out water
Important safety instructions
Before the appliance is used, the main unit
as well as any attachment fi tted should
be checked thoroughly for any defects.
Should the appliance, for instance, have
been dropped onto a hard surface, it must
not be used any longer: even invisible
damage may have adverse eff ects on the
operational safety of the appliance.
Do not operate the foot-massager near a
sink, shower or bath.
If the appliance is being used in a
bathroom, it must be positioned outside
the 0.6 m area (see diagram) in such a way
that the rotary switch cannot be reached
by anyone using the shower or bath.
Additional protection is provided by
fi tting an earth-leakage circuit-breaker,
with a rated tripping current not exceeding
30mA, into your bathroom installation.
Please consult a qualifi ed electrician.
Caution: Do not use the appliance under
any circumstances, if water is seen to be
leaking out.
Foot Massager
Do not leave the foot-massager unattended
while it is switched on.
Th is appliance is not intended for use
by any person (including children) with
reduced physical, sensory or mental
capabilities, or lacking experience and
knowledge, unless they have been given
supervision or instruction concerning
the use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure
that they do not play with the appliance.
Caution: Keep any packaging materials
well away from children: there is a risk of
suff ocation.
Do not stand on the foot-massager; use
it only while sitting.
Th e appliance becomes hot during use.
Especially those who are over-sensitive to
heat should take extreme care when using
the appliance; if the unit should become
excessively hot, the danger might not be
recognised in time.
Th is appliance is intended for domestic
use only and is not designed for medical
or commercial applications.
Always remove the plug from the wall
socket
-
aft er use,
-
in case of any malfunction,
-
before cleaning the appliance.
When removing the plug from the wall
socket, never pull on the power cord;
always grip the plug itself. When removing
the plug from the wall socket, ensure that
your hands are dry.
Th e power cord should be regularly
examined for any sign of damage. In the
event of such damage being found, the
appliance must no longer be used.
Do not operate the appliance if excessive
force has been used to pull the power
cord. Damage cannot always be detected
from the outside; the entire unit should
therefore be checked by a qualifi ed
technician before it is used again.
No responsibility is accepted if damage
results from improper or inappropriate
8