Tip
In order to protect the appliance,
•
please always shut down the
appliance by pressing the power
button instead of plugging off.
9
Unscrew the bottles from the
pump bodies ready for feeding/
storage. Clean the other used
parts of the breast pump
according to the instructions in
chapter 'Cleaning and sterilising'.
Caution
•
Do not continue pumping for
more than 5 minutes at a time if
you do not succeed in expressing
any milk. Try to express at
another time during the day.
•
If the process becomes very
uncomfortable or painful, stop
using the pump and consult your
breastfeeding advisor.
•
Never tilt the breast pump
when the milk has reached the
maximum line on the bottle.
Replace with a new bottle before
re-pumping to avoid spillage.
•
After expression, please take
off the bottle from pump body
immediately, then store the bottle
with sealing disc.
To pause pumping
This breast pump has a pause
function, and you can press the
pause button (
) to pause pumping
if at any time the suction becomes
uncomfortable, there is a need to
change the bottle, reposition the
pump on the breast, or a short rest.
English
14
1
When the breast pump is in
a particular stimulation or
expression mode, press pause
button (
) will pause the
pumping.
» The timer indicator, level
indicator, and stimulation/
expression indicator will flash
to remind you of the pausing
status. (Fig. 19)
Note
•
When the breast pump is
in pause, level down/level
up button and stimulation/
expression switch mode button
will lose their functions. Only
pausing button and power button
still work.
2
Press the pause button
(
) again to continue the
pumping with the stimulation
or expression mode selected
before pausing
Storing your breast milk
Caution
•
Never refreeze breast milk.
•
Do not mix fresh breast milk to
already frozen milk.
•
Always discard any left over milk
at the end of a feed.
Note
•
Only store breast milk collected
with a sterile pump.
1
After you have expressed your
milk, unscrew the pump bodies
from the Philips Avent bottles.