Makita PDC01 Manual De Instrucciones página 13

Using the cord holders
CAUTION:
Attach only the cord of the battery
box to the cord holders. Do not attach the cord
of the adapters to the cord holders. Attaching the
cord of the adapters may invite accident and cause
an injury.
You can attach the cord of the battery box to the cord
holders as shown in the figure.
► Fig.22: 1. Cord holder
You can also attach the cord using only the cord holder
of the waist belt as shown in the figure.
► Fig.23: 1. Cord holder
The cord holders can be attached on either left or right
side of the shoulder harness and waist belt.
► Fig.24: 1. Cord holder
Using the hanging band
Optional accessory
You can use the hanging band for cordless grass trim-
mer or cordless string trimmer with this unit.
Attaching the hanging band
1. Attach the hooks of the hanging band to the rings
of the shoulder harness or waist belt as shown in the
figure. Select the type of band and the connecting
method appropriate for your usage.
► Fig.25: 1. Ring 2. Hook
► Fig.26: 1. Ring 2. Hook
► Fig.27: 1. Ring 2. Hook
► Fig.28: 1. Ring 2. Hook
NOTE: If the tool is bike handle type, attach the band
so that the band passes through inside of the waist
belt as shown in the figure.
► Fig.29: 1. Waist belt 2. Band
2. Attach the hook to the tool.
► Fig.30: 1. Hook
Detaching the tool
Push the levers on the buckle to unlock the buckle.
► Fig.31: 1. Lever
NOTE: The buckle is not equipped depending on the
type of band.
Emergency detachment
1. Push the levers on the buckle of the waist belt to
unlock the buckle.
► Fig.32: 1. Buckle 2. Lever
2. Take off the shoulder harness to release the tool
and the unit.
► Fig.33: 1. Shoulder harness
MAINTENANCE
CAUTION:
Always be sure that the unit is
switched off and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
13 ENGLISH