Sony SRS-WS1 Manual De Instrucciones página 13

Troubleshooting (continued)
You cannot hear
the sound.
(The indicator on
the transmitter
lights up in
yellow.)
You cannot hear
the sound.
(The indicator on
the transmitter
lights up in
green.)
The transmitter is
connected to an AV
amplifier or a home
theater system with the
digital optical cable.
The speaker and the
transmitter are not
paired.
The battery is low.
The signals are not
being received.
Make sure that the audio output setting is
set to linear PCM (page 4), or use the
supplied audio cable (page 10).
If the power indicator on the speaker is
flashing in green, it may be because the
speaker is not paired.
See "Connecting a second speaker"
(page 11).
Charge the speaker (page 5).
Reset the speaker and the transmitter.
Press the power button and vibration button
on the speaker at the same time.
Press these
together
Press the reset button located on the bottom
of the transmitter with a sharp-edged pen or
the like.
Power indicator
13
US