Before You Begin; Parts Included; Tools And Parts Needed; Installation Procedure - Bosch NGM5456UC Manual De Instrucciones

Before You Begin

Parts Included

Installation kit contents
Component
Conversion Kit Instructions
Conversion sticker
Foam tape
65 orifice
76 orifice
88 orifice
Main orifices
NGM5456UC
65 Front right
65 Front left
76 Rear left
88 Rear right

Installation Procedure

This conversion process adjusts the flow of gas to the
burners to accommodate an LP gas fuel source.
CAUTION
9
TURN OFF GAS AND ELECTRICITY
Perform the following:
shut off the gas valve for the gas supply line to
▯
the cooktop
remove the cooktop power cord from the
▯
electrical outlet or turn off the breaker at the
breaker box.
turn all control knobs to the "Off" position.
▯
Quantity
1
1
1
2
1
1
BTU/hr kW
5,000 1.465
5,000 1.465
7,000 2.051
10,000 2.931

Tools and Parts Needed

Checklist

Each of the following steps must be completed
correctly for the appliance to function properly.
Check off each step as it is finished.
Ù
Convert the pressure regulator to use
Step 1
LP gas.
Ù
Remove the grates, burner caps and
Step 2
burners. Remove the Natural Gas (NG)
orifices and replace them with the LP gas
orifices supplied with this kit.
Ù
Replace the burners, burner caps and
Step 3
grates.
Ù
Adjust the unit valves to LP settings.
Step 4
7 mm socket driver
(3 inch minimum exten-
sion)
Flat blade screwdriver,
small thin blade
Adjustable wrench
and/or
slip joint pliers
Scissors
5