Troy-Bilt 020241 Manual Del Operario página 18

Ocultar thumbs Ver también para 020241:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Section
Troubleshooting
7
TROUBLESHOOTING
Problem
Pump has following problems:
failure to produce pressure,
erratic pressure, chattering, loss
of pressure, low water volume.
Detergent fails to mix with spray.
Engine shuts down during
operation.
Cause
1.
Low pressure spray tip installed.
2. Water inlet is blocked.
3. Inadequate water supply.
4. Inlet hose is kinked or leaking.
5. Clogged inlet hose strainer.
6. Water supply is over 100°F.
7.
High pressure hose is blocked
or leaks.
8. Gun leaks.
9. Spray tip is obstructed.
10. Pump is faulty.
1.
Detergent siphoning tube is not
submerged.
2. Detergent siphoning tube/filter is
clogged or cracked.
3. Dirty in-line filter.
4. High pressure spray tip
installed.
Out of fuel.
18
Correction
1.
Replace spray tip with high
pressure spray tip.
2. Clear inlet.
3. Provide adequate water flow.
4. Straighten inlet hose, patch
leak.
5. Check and clean inlet hose
strainer.
6. Provide cooler water supply.
7.
Clear blocks in outlet hose.
8. Replace gun.
9. Clean spray tip.
10. Contact Authorized service
facility.
1.
Insert detergent siphoning tube
into detergent.
2. Clean or replace filter/detergent
siphoning tube.
3. See "Check In-Line Filter".
4. Replace spray tip with low
pressure spray tip.
Fill fuel tank.

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido