Caution; Accord With; Iec 61010-2-032; Iec 61010-2-033 - KPS PA430 Manual De Instrucciones

Digital clamp meter
- This meter is equipped with inrush current measuring function.
- This meter is equipped with auto zero function (at DCA range).
- This meter is equipped with maximum value measuring
function.
- This meter is equipped with minimum value measuring function.
- This meter can measure frequency by clamp.
- This meter has function of auto power off.
- The normal function of the product may be disturbed by strong
Electro-Magnetic interference. If so, simply reset the product to
resume normal operation by following the instruction manual.
In case the function could not resume, please use the product
in other location.
2.1 Names Of Components
(1) Current Clamp
(2) Clamp Lighting Bulb
(3) Panel
(4) Trigger
(5) Function Switch Button (S E L)
(6) MAX/MIN Switch Button (MAX/MIN)
(7) Relative Switch Button (REL)
(8) Liquid Crystal Display (LCD)
(9) COM Jack
(10) Input Jack
(11) Hz/Duty Switch Button (Hz/%)
(12) Reading Hold/Back Light Button (HOLD/B.L)
(13) Rotary selector
(14) OFF - power switch
(15) "+" Symbol
(16) "-" Symbol
(17) Rear Case
(18) Fixing Screw of Battery Cover
(19) Battery Cover
(20) Protective Barrier (to warn the operator of the limit of
safe access)
53
05
Digital clamp meter
1
400A
2
3
4
5
6
REL
8
9
54
15
14
13
16
20
12
11
17

CAUTION

10

ACCORD WITH:

IEC 61010-2-032

18

IEC 61010-2-033

IEC 61010-1

600V CAT III

19
06